Vented options include an optional dimmer and cruise button relocation mount
Honeycomb pattern fits HSW clips and attachments
Gauge hole - 52mm or 2 and 1/16th in
Curved shape matches the dash
-
- GAUGE + VENT -
Fits one 52mm gauge (10mm recessed)
Includes cruise/dimmer relocation mount
-
- GAUGE -
Fits one 52mm gauge (10mm recessed)
-
- VENT -
Includes cruise/dimmer relocation mount
-
- DELETE -
Blank vent face
-
- NANO PRO -
Flush mount for Fuel Tech Nano Pro
(mounting also fits nano WB-02)
-
- NANO PRO + VENT -
Flush mount for Fuel Tech Nano Pro
Includes cruise/dimmer relocation mount
(mounting also fits nano WB-02)
-
- RECESSED 2X4 KEYPAD -
Fits Haltech, Motec, and Grayhill 2X4 CAN keypads
Cutout size - 106 X 64 X 16 mm (W x H x D)
Bolt spacing - 68.6 mm
-
- RECESSED 2X3 KEYPAD -
Fits ECU Master 6 button CAN Keypad
Cutout size - 94.5 X 70 X 16.3 mm (W x H x D)
Bolt spacing - 48.7 mm
NO CRUISE / DIMMER RELOCATION
-
- RECESSED 2X2 KEYPAD -
Fits FuelTech 4 mini 2x2 CAN Keypad
(and ECU Master with side gaps)
Cutout size - X X mm (W x H x D)
Bolt spacing - mm
NO CRUISE / DIMMER RELOCATION
- 66 GAUGE + VENT -
Fits one 66.7 mm gauge (10mm recessed)
NO CRUISE / DIMMER RELOCATION
-
INSTALL ( * - for re installing cruise/dimmer)
1- Remove original vent by prying up on the 2 lower corners to release the clips
*2- Unplug and push out buttons (press in on side metal tabs), they come out the front
*3- Take out relocation mount and insert factory buttons, screw back in to vent body
4- Back out hidden screw below the vent (above the mirror switch)
5- Insert replacement vent. Push in on the lower edge while tightening the screw. It will act as a stud, and hold the lower portion of the vent pulled in
* Honeycomb design and mounting inspired by RostaP Honeycomb Storage Wall (HSW) on Printables - Print your own or buy HSW mounts. Screw type mounts may need longer hardware to fit this vent design since its deeper, clips will work as is *
