Cluster PARTS PANEL Mounts EK

Fits 1996-2000 Honda Civic EK

 * This listing is for a FLAT / PANEL display mount plate *

**NOT A COMPLETE CLUSTER DISPLAY MOUNT!**

Used on V1 cluster housings with hex nuts around the outside. You will need to purchase that housing separately if you do not have one (physical product only)

Mounting plates are mirrored design if you wish to flip the plate to the opposite side. This allows a quick style change to reverse the plate. And so your single gauge, or FuelTech nano can switch sides if your plate has those mount holes

TEXTURE / FINISH PATTERNS ARE ONLY SINGLE SIDED

Housings are designed to use m4 x 8mm screws, assuming the mount plate is 2-2.5mm thick (sold in this listing), and no spacer is used

Spacers are required on larger displays like Haltech IC7 and Tinker 7in in order to clear the cluster bezel (push the display further back into the dash), an 8mm spacer is needed for those displays mentioned (use m4x16mm screws)

EK V1 CLUSTER DESIGN INFO / INSTRUCTION VIDEO

(will be linked here)

What is included with each variation 

• 2mm thick mount plate
• optional m4 hardware

(FT) FUEL TECH NO NANO

- FT450, FT550, AND FT600

 (FT) FUEL TECH WITH NANO

Design is mirrored to switch Nano from LH to RH side

- FT450, FT550, AND FT600

- NANO PRO AND WB-02

AEM CD5

- CD5 ONLY

Design is mirrored to clear connections, with either side facing out

AEM CD5 SINGLE / DUAL 52MM

- CENTER FITS CD5 ONLY

- Mount 1 or 2, 52mm gauges

Design is mirrored to clear CD5 connections, with either side facing out. Flip the plate for single 52mm gauge, to get LH or RH mounting. Dual 52mm is the same either side

*LEAVE A NOTE FOR RH GAUGE INSTEAD

 HALTECH IC7 

- Fits IC7 DISPLAY ONLY

Must use an 8mm spacer in order to push display back into dash, to clear cluster bezel

 TINKER ELECTRONICS 

- FOR 5IN OR 7IN DISPLAY

For 7in display use an 8mm spacer in order to push display back into dash, to clear cluster bezel. The 5in displays clear inside the bezel 

 POWERTUNE

- FOR V4/V5 Display

DOES NOT FIT ULTRA WIDE

Mounting is mirrored so the display can be mounted on either side of the plate

AIM MXS

- FOR MXS / STRADA / 1.2 / 1.3

Design is mirrored so the display can mount on either side of the mounting plate. THE MOUNT HOLES ARE 35 X 124 MM

BLANK / DELETE

- NO MOUNTING CUT OUTS

SEND AN EMAIL, FACEBOOK DM, OR INSTAGRAM DM IF YOU HAVE QUESTIONS. OR WANT HOLES ADDED FOR BLINKERS / OTHER GAUGES OR DISPLAYS

Please watch the attached YouTube video first, that may get your answer faster